It knows each directory by its content, so it knows when a directory was renamed, without needing to be explicitly told.
It doesn’t keep branch history—if it did, reflog (which is local and only kept for 30 days) wouldn’t be needed.
Reflog is an essentially local thing, it shows where a branch used to point in a particular repository instance. It has little to do with history of the project, and often includes temporary commits that shouldn’t be distributed.
It only allows unique tags—so if you want to mark every revision where buildbot succeded to make both update and rolling back easy—you are out of luck
You need some way to specify what you’d want to update or roll back to—what kind of use case are you thinking about? You could support a successful-build branch, for example, so that its tip points to the last successful build, and you could create merge commits with previous successful builds as first parents, for the purpose of linking together all successful builds in that branch.
Tracking path by their content is not always good… It couples content changes with intent changes. If I need to make a copy of directory and then make the copies slowly diverge until they have nothing in common, I may want to mark which is for original intent and which is spin-off.
Branch history is not an inherently local thing.
When I have feature branches for recurring tasks, I will probably call them always the same. I will sometimes merge them with trunk and sometimes spawn them from the new trunk state. Later, I may wish to check whether some change was done in trunk or in the feature branch—it is quite likely to provide some information about commit intent. I can get it in every DVCS I know except Git easily—in Git I need to track DAG to get this information.
About succesful-build branch: for some projects I try to update to trunk head, and if it gives me too much trouble I look for closest previous revision which I can expect to work. In Monotone I simply mark some development commits as tested enough, there is a simple command to get all the branch.tested commits from the last month. This information says something about a commit, and to lose it I have to do something with the certificate that states it. In Git, rev-list behaviour depends on many things that happen later.
Linux kernel history is too big for any of the things I say to make sense for it. But in a medium project, I want to have access to strange parts of history to find out what happenned and how and what did we mean.
Which is my point exactly. It is one aspect of Vi’s criticism of git not storing some important data that is clearly valid. It is a tradeoff that probably doesn’t matter if you are Linus and you are storing code for a Linux kernel but in other cases it is a blatant flaw that needs to be worked around via compromises or kludges.
Git is the absolute worst version control system out there (except for all the others).
Empty directories are sometimes necessary and it’s a pain in the ass that git cannot store them at all. I had to put almost empty README.txt files in directories like log/ in many projects. It’s more a minor annoyance than anything more.
I have a complex enough deployment helper living in Monotone repository for which it is simpler and more natural to keep a few empty directories in the repository than to check-and-create from each of ten shellscripts. It is checkout-and-use, no other setup makes sense, so “just creating them in Makefile” would be suboptimal.
will deal with it. It’s a nice idempotent action. I started using mkdir -p as workaround for git issues, but now it just seems to make far more sense than dicking around manually maintaining working directories.
I know about “mkdir -p”—my non-problem (I was not going to use Git anyway for this project) is that I multiple places where to put it and if I miss one I will not notice for some time.
Saying that recreating something just in case right after checking out the new version makes more sense than simply storing along with all the rest seems to be exactly an example of tool imposing some workflow ideas on people.
Saying that recreating something just in case right after checking out the new version makes more sense than simply storing along with all the rest seems to be exactly an example of tool imposing some workflow ideas on people.
You have it backwards. Using version control to store working areas for programs rather than programs simply mkdir -ping working areas they need seems to be exactly an example of tool imposing some workflow ideas on people.
There are so many common cases where you absolutely need mkdir -p like dynamic working directory layout that it’s mentally simpler to just use it always. It works on 100% of problems, is idempotent, and resistant to human errors.
Why would I ever bother with VCS-based solution what only works in some simple cases like static working directory layouts, is based on non-idempotent operations, and fails often in case of human mistakes?
It just creates so much less mental overhead if you simply mkdir -p place where you want to create your files always, no exceptions.
I understand that people who use languages where mkdir -p is a non-trivial operation won’t get it, but that’s problem with their tools limiting their mindset.
I always try to do things so that they fail either often or never. Sometimes I don’t care much which is the case—if they do fail often, it is easy to reproduce and I will fix it with less effort than an elusive bug.
“mkdir -p” is not resistant to human error of not calling it / not including the file that does it in one of ten scripts.
“mkdir -p” means that browsing the VCS history you do not see the real layout.
I bother with VCS-based solution when it works better (and my “better” includes estimated time to catch trivial mistakes and ease of looking up old history) than “mkdir -p”. Dynamic working directory layout is something I have yet to see often, so I do not discard better-for-me solutions because of reasons unapplicable to current project.
Human mistakes depend on workflow. Do you often accidentally remove your checkout? And human mistakes in initial setups should cause the failure as often as possible when they happen.
“mkdir -p” before each cd will make the scripts considerably longer for no sane reason. And I have a few places in this very deployment helper system where “mkdir -p” before cd will make the failure mode less convenient.
And yes, all that is writen in shell script and I do use “mkdir -p” in the code where it made sense for my task at hand.
Somehow, most buildsystems for complex packages run make with changing working directories. Even in single script using subshells, it is trivial to save some effort with changing directories without complicating the code.
It is a deployment helper, not a single-package build system, so it has to do some work with numerous checkouts of dependencies. It is more natural to write some parts of code to run inside working directories of individual packages.
Is that something I need a justification for? My version control system throws away stuff that I am trying store. I’d also prefer it not to throw away files staring with ‘b’.
I’ve learned to make my programs pessimistic and recreate the file system if necessary. It surprised me a few times before I learned the quirks.
It knows each directory by its content, so it knows when a directory was renamed, without needing to be explicitly told.
Reflog is an essentially local thing, it shows where a branch used to point in a particular repository instance. It has little to do with history of the project, and often includes temporary commits that shouldn’t be distributed.
You need some way to specify what you’d want to update or roll back to—what kind of use case are you thinking about? You could support a successful-build branch, for example, so that its tip points to the last successful build, and you could create merge commits with previous successful builds as first parents, for the purpose of linking together all successful builds in that branch.
Tracking path by their content is not always good… It couples content changes with intent changes. If I need to make a copy of directory and then make the copies slowly diverge until they have nothing in common, I may want to mark which is for original intent and which is spin-off.
Branch history is not an inherently local thing.
When I have feature branches for recurring tasks, I will probably call them always the same. I will sometimes merge them with trunk and sometimes spawn them from the new trunk state. Later, I may wish to check whether some change was done in trunk or in the feature branch—it is quite likely to provide some information about commit intent. I can get it in every DVCS I know except Git easily—in Git I need to track DAG to get this information.
About succesful-build branch: for some projects I try to update to trunk head, and if it gives me too much trouble I look for closest previous revision which I can expect to work. In Monotone I simply mark some development commits as tested enough, there is a simple command to get all the branch.tested commits from the last month. This information says something about a commit, and to lose it I have to do something with the certificate that states it. In Git, rev-list behaviour depends on many things that happen later.
Linux kernel history is too big for any of the things I say to make sense for it. But in a medium project, I want to have access to strange parts of history to find out what happenned and how and what did we mean.
Doesn’t work so well if the content is ‘nothing’.
Git doesn’t notice these at all.
Which is my point exactly. It is one aspect of Vi’s criticism of git not storing some important data that is clearly valid. It is a tradeoff that probably doesn’t matter if you are Linus and you are storing code for a Linux kernel but in other cases it is a blatant flaw that needs to be worked around via compromises or kludges.
Git is the absolute worst version control system out there (except for all the others).
In what situations would you want to store an empty directory and pay attention to whether it is renamed?
Empty directories are sometimes necessary and it’s a pain in the ass that git cannot store them at all. I had to put almost empty README.txt files in directories like log/ in many projects. It’s more a minor annoyance than anything more.
I have a complex enough deployment helper living in Monotone repository for which it is simpler and more natural to keep a few empty directories in the repository than to check-and-create from each of ten shellscripts. It is checkout-and-use, no other setup makes sense, so “just creating them in Makefile” would be suboptimal.
A single line of:
will deal with it. It’s a nice idempotent action. I started using
mkdir -pas workaround forgitissues, but now it just seems to make far more sense than dicking around manually maintaining working directories.I know about “mkdir -p”—my non-problem (I was not going to use Git anyway for this project) is that I multiple places where to put it and if I miss one I will not notice for some time.
Saying that recreating something just in case right after checking out the new version makes more sense than simply storing along with all the rest seems to be exactly an example of tool imposing some workflow ideas on people.
You have it backwards. Using version control to store working areas for programs rather than programs simply
mkdir -ping working areas they need seems to be exactly an example of tool imposing some workflow ideas on people.I’m mostly serious here.
I have two choices, you have one. My tool imposes less workflow ideas here. It’s totally information-theoretical.
There are so many common cases where you absolutely need
mkdir -plike dynamic working directory layout that it’s mentally simpler to just use it always. It works on 100% of problems, is idempotent, and resistant to human errors.Why would I ever bother with VCS-based solution what only works in some simple cases like static working directory layouts, is based on non-idempotent operations, and fails often in case of human mistakes?
It just creates so much less mental overhead if you simply
mkdir -pplace where you want to create your files always, no exceptions.I understand that people who use languages where
mkdir -pis a non-trivial operation won’t get it, but that’s problem with their tools limiting their mindset.I always try to do things so that they fail either often or never. Sometimes I don’t care much which is the case—if they do fail often, it is easy to reproduce and I will fix it with less effort than an elusive bug.
“mkdir -p” is not resistant to human error of not calling it / not including the file that does it in one of ten scripts.
“mkdir -p” means that browsing the VCS history you do not see the real layout.
I bother with VCS-based solution when it works better (and my “better” includes estimated time to catch trivial mistakes and ease of looking up old history) than “mkdir -p”. Dynamic working directory layout is something I have yet to see often, so I do not discard better-for-me solutions because of reasons unapplicable to current project.
Human mistakes depend on workflow. Do you often accidentally remove your checkout? And human mistakes in initial setups should cause the failure as often as possible when they happen.
“mkdir -p” before each cd will make the scripts considerably longer for no sane reason. And I have a few places in this very deployment helper system where “mkdir -p” before cd will make the failure mode less convenient.
And yes, all that is writen in shell script and I do use “mkdir -p” in the code where it made sense for my task at hand.
Why are you using
cdat all? You usemkdir -pbefore creating temporary files, and never randomlycd.Anyway, this thread isn’t really getting anywhere.
Somehow, most buildsystems for complex packages run make with changing working directories. Even in single script using subshells, it is trivial to save some effort with changing directories without complicating the code.
It is a deployment helper, not a single-package build system, so it has to do some work with numerous checkouts of dependencies. It is more natural to write some parts of code to run inside working directories of individual packages.
This is closer to trolling at Vi than it is to a deep insight.
You’re mostly wrong. Enough so that I reread your comment 4 times to be sure I was parsing correctly.
Is that something I need a justification for? My version control system throws away stuff that I am trying store. I’d also prefer it not to throw away files staring with ‘b’.
I’ve learned to make my programs pessimistic and recreate the file system if necessary. It surprised me a few times before I learned the quirks.
No, just curious. I have not encountered and could not imagine a use case.
Directories, in my mind, are meta-information about files, so it makes no sense to me to store an empty directory.
I may be missing context here, but I frequently create empty directories to guide future filing/sorting behavior.
The examples mentioned so far could be described as meta information about future intended files.